Lifting Points for bolting - Eye bolt/-nut - RS/RM

Product enquiry

... high tensile and distinctive

With the following characteristics, distinctive in comparison to the conventional DIN - eye bolts; An octagonal shape symbolising quality class 8 Colored red, the identification color of quality class 8

Identification: Clear WLL indication for the most unfavorable load direction F2 (not permissible for DIN 580). Forged mateterial 1.6541, high tensile and annealed, 100% electromagnetic crack detected according to EN 1677-1 and with a 4 :1 design factor.

Loaded in the direction F1, an up to four times higher factor of the value F2 is acceptable. Work piece material, at least 1.0037 (St 37).

For light metals, nonferrous heavy metals and grey cast iron, the thread type allocation must be done in such a way that, the WLL of the thread type fulfils the requirements of the respective work piece. Make sure the bolting surface is plain. Ensure an appropriate bore depth to facilitate an optimal sitting of the engaging surface.

Eyebolts for Lifting points

Always make sure that the eye bolt is tight before loading. The seat - engaging surface of the eye bolt must evenly and completely lie onto the surface of the work piece. Swiveling movements must be avoided during transportation. Impact loaded or when operated in environments with vibrations, unintentional loosening can happen.

Securing possibilities: Use of a liquid thread securing medium eg. Loctite (follow the manufacturer´s recomendations). For applications of the RS eye bolt, there is a reliable - operations certification by the respective technical Committee. It does not automatically adjust to the direction of pull. Not according to the RAG-Standard (Germany).

  • Also available in imperial and special threads.
  • Before lifting check the tightness of the eyebolt and nut! Avoid rotating movement during transport.
  • Assure a plane bolting surface.
  • Attention: Refer to RUD user instruction!
Product Code: RS, RM