Lifting Points for bolting - INOX-STAR eyebolt

Product enquiry

– stainless

Complies with the machinery directives 2006/42/EG

Pentagonal design - clearly distinctive in comparison to the DIN 580 eye bolt.

Identification : Clear WLL indication for the most unfavorable load direction F (not permissible for DIN 580). With a forged ring body out of the material 1.4462, 100% electromagnetic crack detected and with a 4 :1 design factor. Ensure an appropriate bore depth to facilitate an optimal sitting of the engaging surface.

Without an additional washer, screw the INOX-STAR into the work piece until the seat - engaging surface of the hexagon socket bolt in the INOX-STAR evenly lies on the surface of the work piece. The thread bore countersink is equal to the effective diameter of the thread.

Always make sure that the hexagon socket bolt is tight before loading.

INOX-STAR Eyebolt for Lifting Points

When impact loaded or operated in environments with skewing and vibrations, unintentional loosening can happen, especially if through bolts with nuts are used. Securing possibilities: Use of a liquid thread securing medium eg. Loctite ( follow the manufacturer´s recommendations).

In a tightened condition, the INOX-STAR must be able to swivel up to 360°. Before loading, adjust the assembly to the direction of the applied force. A captive hexagon socket bolt - special bolt. The INOX-STAR is patent protected : GM 9402014 - and further industrial property rights are registered under GM 9316475. Before loading, adjust the VRS to the direction of the applied force.

Eyebolt for Lifting Points
Load Direction

INOX-STAR eyebolt

– stainless – 50 % more than DIN with no directional restrictions!

  • Pentagonal shape – significantly different to the DIN580 eyebolt.
  • Turns through 360°. Can be set in the direction of the load.
  • Clear statement of rated load F1 for the unfavourable load range. Safety factor 4 : 1.
  • Forged eye body.
  • Material of eye body and screw: 1.4462, duplex steel (high durability in sea water and in environments with high chlorine ion concentrations).
  • 100 % crack-tested
  • Captive mounted bolt.
  • Patented wear mark on the eyebody.
  • Tighten hand-tight when mounting with hexagonal wrench or adapter piece. Do not use an extension.
  • The INOX-STAR must be able to be turned through 360° when screwed in.
  • Set in the direction of force before loading.
  • Component protected under patent law: European patent EP 654611.

Notice: Follow the Instructions for use!

Right reserved to alter specifications without notice.

Subject to technical alternations!

Product Code: M12, M16, M20, M24