Lifting Points for bolting - Load Ring - VRBG 10/16t

Product enquiry

... for bolting with relief lugs

Complies with the machinery directives 2006/42/EG

The special relief lugs protect the securing bolt against bending and shearing loads. This provides additional safety.

Stowable with smaller bolts and thus low profile. A favourable distribution of the introduced forces. A forged ring according to EN 1677-1, quality grade 80, 100% electromagnetic crack detected and coloured red. It is in compliance with the approval requirements of the respective employers´ liability insurance association (BG).

Only the provided crack detected hexagon socket bolts according to DIN 912 should be used. Make sure the bolting surface is plain.

Scribing and drilling according to the tolerance range of VRBG. Work piece material, at least 1.0037 (St 37).

Load rings

For light metals, nonferrous heavy metals and grey cast iron, the thread type allocation must be done in such a way that, the WLL of the thread type fulfils the requirements of the respective work piece. Tighten up the bolts with a torque of 300 Nm.

Impact loaded or when operated in environments with vibrations, unintentional loosening can happen. Securing possibilities: Use of a liquid thread securing medium eg. Loctite ( follow the manufacturer´s recomendations) or the positive bolt securing eg. castellated nut with a split pin, counter nut e.t.c. After being used over a longer period of time, inspect the bolts to make sure they are still tight

  • Relief lugs. With VRBG 10 and 16, the connecting bolts protect against bending- and shearing loads. This ensures additional safety.
  • Smaller bolt and a low profile due to the pivoting ring.
  • Scribing and drilling acc. to tolerance range of VRBG.
  • Check tightness of bolts at regular intervals.
  • Favourable load force introduction and distribution.
  • Supplied inner hexagon bolts are 100 % crack detected!
  • Workpiece material at least 1.0037 (St 37-2) S235JR.
Product Code: VRBG