PAGE NAVIGATION

CONTACT US:

Tel : 0861040506

Int : +2711792 5226

Cell : +2783 2514312

info@liftlash.co.za

SIS 80h.jpg

LIFTING - RUD Lifting Points Short catalogue

Lifting_Points_short_catalogue_V1_en-1X.jpg

LIFTING POINTS.

Short catalogue 2019/2020 | English

Lifting_Points_Main_catalogue_V1_en-1A.jpg
B.jpg
C.jpg
N.jpg
E.jpg
O.jpg
G.jpg
H.jpg
I.jpg
J.jpg
F.jpg
K.jpg
L.jpg
P.jpg
M.jpg
Q.jpg
 

Lifting points with this product characteristic are ideally suited for rotating and turning loads.

 

Ball bearing: suitable for rotating and turning. However, not suitable for permanent turning movements under load!

 

4-fold safety against breakage for lifting points.

 

Easy testing and documentation. With the RUD BLUE-ID SYSTEM (equipped with an RFID chip).

 

Loadable on all sides: Anchor points which can be loaded in all conceivable directions or which automatically turn into the load direction.

 

The lifting point is approved by the DGUV (German Statutory Accident Insurance) and has the corresponding certificate.

 

The lifting point can be rotated by 360°. However, this is not to be equated with rotating and turning under load!

 

The lifting point has a pivoting area in the suspension link of XXX° (representing the different values).

 

Possible thread types of the respective lifting point. Symbols according to: M, MF, UNC, 8-UN, UNF, BSW, G.

 

The lifting point is available with variable/different thread lengths.

 

The retaining spring holds the suspension link/suspension bracket in the adjusted position. This prevents rattling noise and simplifies painting.

 

The operating temperature range of the lifting point is without permanent reduction in the working load limit.

 

The maximum operating temperature of the lifting point with proportional, product-dependent reduction in working load limit.

 

DNVGL-approved. This product is suitable for marine and offshore applications.

 

The lifting points with this symbol are equipped with the ICE-BOLT.

 

The lifting point has been designed with the innovative SR-ball-bearing (permanent rotation movement and turning under load)

PRODUCT FEATURES: EXPLANATION OF SYMBOLS.


CONTENTS.

A.jpg
Lifting_Points_short_catalogue_V1_en-2X.jpg

MORE THAN PRODUCTS:
YOUR PARTNER FOR SOLUTIONS.

From mould making and automotive industry to the offshore sector: RUD products stand for innovation, quality, ergonomics and safety. As a dynamic, globally active company, we develop chain systems and components for a wide range of applications. And we have been doing this for 140 years. In addition, we have 35 years of experience in lifting technology and load securing, with 700 different lifting point variants for demanding requirements.

 

At RUD, however, you get much more than just products. We are committed to always offer you a tailor-made solution that meets your specific requirements. In addition, we support you with sophisticated consulting services and other services to make your products successful.

 

Welcome to RUD.

 
Lifting_Points_short_catalogue_V1_en-4X.jpg

OUR COMMITMENT:
HIGHEST QUALITY,
BEST CUSTOMER ORIENTATION.

Innovation, perfection and the drive to create added values for our customers: This is RUD’s passion. Being a technological think tank, we repeatedly set standards for load securing and lifting technologies with our lifting and lashing systems.

 

Our worldwide chain production facilities are among the most modern of their kind. We employ highly qualified specialists who are never satisfied with the status quo. Our thinking is focused on fulfilling customer needs and maximum benefit for the user. The long-term partnership with our customers, their satisfaction and their trust are our focus.

RUD. MADE IN GERMANY

All RUD products around lifting and moving of loads have something important in common: They are developed and manufactured by us in Germany. In R&D alliances with research institutes, universities, suppliers and customers. With plenty of know-how, high creativity and state-of-the-art technology. This results in products and solutions of outstanding material quality, high robustness and exemplary ergonomics. In short: Quality made in Germany – made by RUD.

 
Lifting_Points_short_catalogue_V1_en-5X.jpg

THE WORLD IS OUR HOME.

Not only our products, but also RUD’s solution and consulting expertise are available to you all over the world. This is ensured by a large number of subsidiaries, affiliated companies and RUD specialist trade partners. Satisfied users of RUD lifting and lashing solutions can also be found in almost all industrial sectors.

TRADITION MEETS FUTURE.

Time and again, RUD is at the forefront of important developments. Much of what is now standard in lifting and lashing originated in RUD’s think tank. In 1967, RUD was the first to receive the approval for quality class 5 (H1-5) and 2007 for round steel chains of the highest quality class 12 (D1-12). To simplify testing processes, for a long time we have been equipping many products with RFID transponders and offer a complete hardware and software system for efficient test management. The latest milestone: In 2019, RUD presented the first lifting point that “thinks” and can thus avoid dangerous transverse loads. And there is still a lot do to for us. Join us into the future.

 
Lifting_Points_short_catalogue_V1_en-6X.jpg

EFFICIENCY IN LIFTING AND MOVING? LET’S TALK ABOUT IT.

Innovation, perfection and the drive to create added values for our customers: This is RUD’s passion. Being a technological think tank, we repeatedly set standards for load securing and lifting technologies with our lifting and lashing systems.

 

Our worldwide chain production facilities are among the most modern of their kind. We employ highly qualified specialists who are never satisfied with the status quo. Our thinking is focused on fulfilling customer needs and maximum benefit for the user. The long-term partnership with our customers, their satisfaction and their trust are our focus.

“MOVING LOADS MUST NOT ONLY BE SAFE, BUT ALSO COST EFFICIENT.”

Production management, mechanical engineering:

“When you move heavy and high-quality loads every single day, high cost efficiency is just as important as safety. That's why we need products that are beyond all doubt in terms of quality and that perfectly meet our high requirements. A long service life through the use of modern materials and high-quality workmanship is a very important efficiency criterion, but user friendliness is also very important to us. At the same time, we need a partner who can advise us on very specific projects and offer a tailor-made lifting solution, because sometimes only an individual solution is ultimately safe and cost-effective.”

 
Lifting_Points_short_catalogue_V1_en-7X.jpg
 
Lifting_Points_short_catalogue_V1_en-8X.jpg

ICE-BOLT:
THE UNPARALLELED BOLT CLASS FOR LIFTING POINTS.

FROM THE CHAIN TO THE BOLT

When it comes to materials for lifting means or lifting points, RUD has always been one step ahead of its time. RUD’s specialists developed the well-known ICE chain a few years ago. Thanks to the “Innovative Chain Evolution”, an ICE lifting or lashing chain can now replace a grade 8 chain of the next larger nominal thickness. The advantage: The dead weight of the ICE pink-coloured chain is more than 30 percent lower, the working ergonomics is noticeably higher.

HIGH SAFETY EVEN AT LOW TEMPERATURES AND EXTREMELY HIGH TEMPERATURES

However, not only chains, but also the fastening bolts of modern screw able lifting points perform very hard work. Every day they have to withstand the highest loads. And not just in one direction, but in every conceivable one. These extreme bending and shearing forces must be safely absorbed both statically and dynamically. This is just as true at Arctic temperatures as it is at extremely high temperatures.

 
Lifting_Points_short_catalogue_V1_en-9X .jpg

THE ICE-BOLT: HIGHER WORKING LOAD LIMITS WITH SMALLER BOLT DIAMETERS.

After intensive development work, the RUD engineers succeeded in transferring the innovative ICE material to the fastening bolts of the RUD lifting points: The ICE-BOLT was born. After all, the patented fine-grained steel of the ICE chains is virtually predestined to meet the high safety requirements in lifting technology. For example, the breaking forces of M8 – M16 could be increased by 88 % compared to 8.8 bolts and by 44 % compared to 10.9 bolts. This allows an M24 ICE-BOLT to be used instead of an M30-8.8 bolt. And this with at least the same, but usually higher breaking force. In terms of bending strength, the ICE-BOLT effortlessly beats grades 10.9 and 12.9 and even approaches the values of 8.8 bolts

SAFETY MEETS ECONOMY: THE DECISIVE ADVANTAGES OF THE ICE-BOLT.

  • Higher working load limits or thinner bolt diameters.

  • Unmatched high safety factors.

  • Incomparable low temperature resistance down to -60 °C.

  • Maximum strength with particularly high toughness.

  • Particularly high bending resistance at the critical transition between load absorption and load.

  • Reduced wear.

 

In short: RUD lifting points with ICE bolts stand for safety – at grade 12.

The thread of the ICE-BOLT proves itself in the prism bending test. The test shows: The ICE-BOLT masters static and dynamic loads safely.

INCREASE IN THE BREAKING FORCE THANKS TO ICE-BOLT.

 
 
1-1 Lifting_Means_System_Main_catalogue_V1_en-28 .jpg

SIMPLE PRODUCT INSPECTING WITH RFID TECHNOLOGY.

Fitted as standard in defined RUD products. Can be retrofitted for many other products.

THE RUD BLUE-ID SYSTEM: IDENTIFY. TRANSMIT. MANAGE.

From RDIF transponders and readers to a documentation and management software: With the RUD BLUE SYSTEM, we offer you a comfortable overall solution for inspecting your equipment. This noticeably relieves your daily workload and saves costs.

 

The wireless and safe transmission via RFID transponders makes the product identification more convenient than ever. And with our readers and the software solution, documentation and administration also become incredibly easy. Thus, with a single click, all RUD components with RFID tags can be identified contact-free and without errors and transmitted directly to the software or app for further processing of the test data. It could not be more convenient or more secure. Your entire inspecting process will be simpler, faster and more reliable. This gives you more time for your core business

THE RUD BLUE-ID SYSTEM.

  • Lower inspection costs, time and personnel expenditure.

  • More process and legal security (avoidance of errors).

  • Factory preassigned product information simple, contact-free and fast readout on site.

  • Clear marking and identification of the products with RFID technology.

  • Offline inspecting possible without Internet access.

  • Simple documentation and administration of test data with the cloud based software solution AYE-D.NET

If you see this symbol next to the image of an RUD product, you know: An RFID transponder is installed here.

 
Lifting_Points_short_catalogue_V1_en-12X.jpg
 
1-1 Lifting_Means_System_Main_catalogue_V1_en-29 .jpg

THE HARDWARE. FLEXIBLE, ADAPTABLE, RESISTANT.

RFID transponders are already integrated as standard in defined RUD products. In addition, we offer you numerous possibilities to retrofit components safely and permanently with one of our transponders. Each of them is extremely resistant and can withstand even the harshest environmental conditions such as extreme temperatures or chemically aggressive substances

The RUD ID-POINT®. The press-fit version.

The RUD ID-STICKER. The glue version.

The RUD ID-TAG®. The clip version

The RUD ID-LINK®. The sagging version.

The RUD ID-USB-READER.

THE SOFTWARE. HIGH-PERFORMANCE, MODULAR, SIMPLE TO USE.

As a combination of inspecting, administration and documentation software, AYE-D.NET opens up numerous possibilities in inspecting administration and subsequent processes. We offer the cloud-based software tool as a SaaS solution together with our partner Syfit. Alternatively, you can organise the test documentation with existing databases and standard programmes such as Office applications, SAP etc.

With one click immediate and on site product data via rud.com or the AYE-D.NET app

(designation, WLL, test data etc.)

RFID TRANSPONDER PROGRAM

Flexible variety: press-fit, glue, clip, sag.

USB READER For contact-free and secure readout of the ID number

AYE-D.NET SOFTWARE SOLUTION Cloud-based solution of our partner Syfit for documentation and maintenance of the test data.

CUSTOMER-SPECIFIC SOLUTION Individual and flexible documentation and maintenance of test data with customer-specific database, Office solution like MS Word, MS Excel, SAP or another program.

Lifting_Points_short_catalogue_V1_en-13X.jpg

OVERVIEW

LIFTING POINTS FOR BOLTING.

 
Lifting_Points_short_catalogue_V1_en-14X.jpg

ACP-TURNADO

PRODUCT FEATURES

  • Comprehensive range of WLL 1.35 t – 8 t.

  • Up to 30% higher working load limits (WLL).

  • Unique RUD spring mechanism.

  • No jamming of the lifting ring.

  • No dangerous transverse loads.

  • No kinks.

  • ICE-BOLT combination head bolt.

  • Swivels by 180°.

  • Rotates by 360°

The world’s first lifting point that thinks.

For more information:

acp-turnado.com

 
Lifting_Points_short_catalogue_V1_en-15X.jpg
 
Lifting_Points_short_catalogue_V1_en-16X.jpg

VLBG-PLUS

PRODUCT FEATURES:

 

  • Comprehensive range of WLL 0.63 t – 20 t.

  • Captive but exchangeable ICE-BOLT made out of patented steel with special corrosion protection Corrud-DT. Non-hazardous deep temperature usage; higher toughness and therefore higher bending strength as well as less wear occurrence.

  • Clamping spring works as a noise reduction and holds the suspension ring in the requested position; therefore, simple hinge of lifting means possible respectively at design if turned down.

VIP Load ring for bolting PLUS.

  • The Original, now with 45 % higher WLL at an average (M8 – M30).

  • Bracket adjustable in force direction.

  • Comprehensive range of threads.

 
Lifting_Points_short_catalogue_V1_en-17X.jpg

PP-S / PP-B / PP-VIP

PRODUCT FEATURES

 

  • Comprehensive range of WLL 0.63 t – 10 t.

  • PP-S: Universal hook connection for ring assemblies, round slings, wire ropes, hook assemblies.

  • PP-B: Ring connection for hook assemblies.

  • PP-VIP: direct VIP-chain connection.

  • So-PP-S, So-PP-B, So-PP-VIP: variable thread lengths.

  • Rotatable at nominal WLL, 90° to the bolt-on direction.

 

  • Lowest kinking possibility due to cardan joint.

 

  • PP-VIP, So-PP-VIP: Universal and non-mix-up clevis connection for chains, hooks and eye.

 

  • PP-S, So-PP-S: The shape of the hook tip avoids unintentional attachment into small holes and tip loading.

 

  • Robust, forged safety latch.

PowerPoint®-Star / -B-Ring connect / -VIP-chain connect.

  • Rotating 360°, pivoting 230°.

  • Double ball bearing for turning/ rotating operations.

  • Universal, unmistakable VIP connection for chain, hook and eye

 
Lifting_Points_short_catalogue_V1_en-18X.jpg

VWBG-V / VWBG

PRODUCT FEATURES

  • Comprehensive range of WLL 0.3 t – 5 t / 6 t – 50 t.

 

  • Clear marking of the minimum WLL for all loading / directions. Higher WLL possible when location and installation is optimized.

 

  • Rotatable at nominal WLL, 90° to the bolt-on direction.

 

  • Variable bolt lengths available for tapped or through holes.

 

  • VWBG-V: Non removable special bolt (this reduces the risk of improper standard bolts).

 

  • VWBG-V: RUD bolts with special corrosion protection Corrud-DT.

 

  • Large distance between bolt-on surface and load to avoid damage.

VIP Load ring for bolting-Vario / VIP Load ring for bolting.

  • Rotating 360°, pivoting 230°.

  • Ball bearing for a shock-free rotating and turning with less friction.

  • Optical markings to determine the load angle and wear

 
Lifting_Points_short_catalogue_V1_en-19X.jpg

VRS-STARPOINT

PRODUCT FEATURES

 

  • Comprehensive range of WLL 0.1 t – 20 t.

 

  • Non-detachable ICE-BOLT made of patent steel (M8 – M24), thus reducing the risk of using unsuitable standard bolts. Special bolt for safe use at low temperatures with higher toughness and thus higher bending strength as well as less wear.

 

  • The WLL statement corresponds to the minimum WLL in all loading directions. Higher WLL possible when location and installation is optimized.

 

  • Variable bolt lengths available for tapped or through holes

Vario eye bolt

  • Rotating 360°.

  • Several times higher WLL than the DIN 580 eye bolt.

  • Easy-Fit-Key for easy assembly and disassembly

 
Lifting_Points_short_catalogue_V1_en-20X.jpg

VRM-STARPOINT

PRODUCT FEATURES

  • Comprehensive range of WLL 0.1 t – 4.5 t.

 

  • The WLL statement corresponds to the minimum WLL in all loading directions. Higher WLL possible when location and installation is optimized.

 

  • Available as Standard Metric Thread M6 – M30 (DIN EN 13).

 

  • Rotating 360°.

 

  • Wide range of threads.

Vario eye nut.

 
Lifting_Points_short_catalogue_V1_en-21X.jpg

RS / RM

Eye bolt / Eye nut.

PRODUCT FEATURES

 

  • Comprehensive range of WLL 0.1 t – 8 t.

 

  • Considerably higher WLL (in comparison to DIN 580/582) at vertical load.

 

  • Large WLL range: M, MF, UNC, UNF, 8UN, BSW, G.

 

  • Clear marking of the minimum WLL for all loading directions.

 

  • Quick and easy installation with just one bolt connection.

 

  • Large WLL range.

 

  • Large thread range

 
Lifting_Points_short_catalogue_V1_en-22X.jpg

ICE-LBG-SR

PRODUCT FEATURES

 

  • Captive but exchangeable ICE-BOLT made out of patented steel with special corrosion protection Corrud-DT. Non-hazardous low temperature usage; higher toughness and therefore higher bending strength as well as less wear occurrence.

 

  • Clear marking of the minimum WLL for all loading directions. Marking with requested torque moment and nominal WLL with a safety factor of 4:1 (MD 2006/42/EC) and 5:1 (ASME B 30.26).

 

  • SR-ball bearing is the optimal solution for permanent turning and flipping actions at WLL and without loosening the mounting bolt.

 

  • Clamping spring works as a noise reduction and holds the suspension ring in the requested position; therefore simple hinge of lifting mean possible respectively flat design if turned down

ICE Load ring for bolting SUPER-ROTATION®.

  • Rotating 360°.

  • Several times higher WLL than the DIN 580 eye bolt.

  • Easy-Fit-Key for easy assembly and disassembly

 
Lifting_Points_short_catalogue_V1_en-23X.jpg

WBPG

PRODUCT FEATURES

 

  • Comprehensive range of WLL 85 t – 250 t.

 

  • Suspension ring pivots 180°.

 

  • Lifting points rotates 360°.

 

  • Detachable suspension ring in the shape of a shackle, for the attachment of common lifting means.

 

  • Original RUD bolt with special corrosion protection Corrud-DT.

 

  • Assembly with flat/ring wrench or Allen key possible.

 

  • Also available with a sling shackle next to the suspension ring. Model WBPG-SL.

Hoist ring boltable on plate for heavy duty applications.

  • Heavy duty design.

  • WLL up to 250 t.

  • Rotating 360°

 
Lifting_Points_short_catalogue_V1_en-24X.jpg

VABH-B / VCGH-G

PRODUCT FEATURES

  • Comprehensive range of WLL 1.5 t – 6.7 t / 10 t – 20 t.

 

  • Can be combined with most commercial lifting means without additional connecting element.

 

  • ICE-BOLT made of patented steel. Non-hazardous deep temperature usage; higher toughness and therefore higher bending strength as well as less wear occurrence.

 

  • Patented markings for easy determination for withdraw of service.

 

  • Robust, forged safety latch.

VIP Excavator hooks for bolting.

  • Lifting point for spreaders and beams.

  • For wire ropes and round slings.

  • For lifting means with loop or oval suspension ring.

 
Lifting_Points_short_catalogue_V1_en-25X.jpg

B-ABA

PRODUCT FEATURES

 

  • Comprehensive range of WLL 1.6 t – 31.5 t.

 

  • No rattling noise or shaking even at strong vibrations or shock loads, simple hinge of lifting means possible.

 

  • ICE-BOLT made out of patented steel. Non-hazardous deep temperature usage; higher toughness and therefore higher bending strength as well as less wear occurrence.

 

  • Patented wear markings inside and outside.

 

  • Clear marking of the minimum WLL.

Boltable lifting point, full working load in all directions.

  • Able to bear load on all sides.

  • 4-fold safety against breakage.

  • Quenched and tempered base body, thus more resistant to wear.

 
Lifting_Points_short_catalogue_V1_en-26X.jpg

RBG / VRBG

PRODUCT FEATURES

  • Comprehensive range of WLL 3 t – 50 t.

 

  • Split force introduction due to multiple point fixing.

 

  • Suspension ring pivots 180°.

 

  • 100 % WLL at 90° in the load ring plane possible.

 

  • Clear marking of the minimum WLL for all loading directions.

Load ring eye plate / VIP Load ring eye plate.

  • Part-protecting application of force through several fixtures.

  • Working Load Limit up to 50 t

 
Lifting_Points_short_catalogue_V1_en-27X.jpg

T-FRB / B-FRB

PRODUCT FEATURES

 

  • High flexibility! Optimal use in different drill patterns and pitch circle diameters of the flange.

 

  • Split force introduction due to multiple point fixing.

 

  • Large distance between bolt-on surface and load to avoid damage.

 

  • Patented markings for easy determination for withdraw of service.

 

  • Variable thread lengths are available for usage at thread holes and at through hole fixtures.

 

  • The component is equipped with an axial bushing disc for optimized 90° loading.

NEW: Designed improved once again!

“FLARIBO” / Flange load ring top flange / Flange load ring bottom flange.

  • High flexibility.

  • Lifting point pivots 180°.

  • The component is equipped with an axial bushing disc for optimized 90° loading.

 
Lifting_Points_short_catalogue_V1_en-28X.jpg

INOX-STAR

PRODUCT FEATURES

 

  • Comprehensive range of WLL 0.5 t – 2.5 t.

 

  • Non removable special bolt and ring body made out of Duplex Steel 1.4462.

 

  • Variable thread lengths are available for usage at thread holes and at through hole fixtures.

 

  • Quick and easy installation with just one bolt connection.

 

  • High resistance in sea water or in environments with high chlorine ion concentration.

  • Rotating 360°.

  • Able to bear load on all sides.

  • Special bolt and ring body made out of Duplex Steel 1.4462

Stainless steel eye bolt.

 
Lifting_Points_short_catalogue_V1_en-29X.jpg

PSA INOX-STAR
PSA VRS-STARPOINT

PRODUCT FEATURES

PSA INOX-STAR:

 

  • Range of WLL 1 – 2 people.

  • Ring body and bolt made from duplex steel 1.4462.

  • The penta shape clearly distinguishes it from conventional lifting lugs.

  • Non-detachable special bolt.

 

PSA VRS-STARPOINT:

 

  • Range of WLL 1 – 2 people.

  • Non-detachable special bolt

  • PSA-INOX-STAR made from stainless steel.

  • Rotating 360°

Stainless steel eye bolt.

 
Lifting_Points_short_catalogue_V1_en-30X.jpg
 
Lifting_Points_short_catalogue_V1_en-31X .jpg

OVERVIEW – LIFTING POINTS FOR WELDING.

 
Lifting_Points_short_catalogue_V1_en-32X.jpg

VLBS / VLBS-U

PRODUCT FEATURES

 

  • Comprehensive range of WLL 1.5 t – 16 t.

 

  • Suspension ring with optimized function form for a better support at side.

 

  • Suspension ring pivots 180°.

 

  • VLBS-P: Suspension ring with enlarged pivoting area.

 

  • 100 % WLL at 90° in the load ring plane possible.

 

  • Clamping spring works as a noise reduction and holds the suspension ring in the requested position.

 

  • Distance knobs at the weld-on block to achieve the necessary distance for the root weld (except VLBS-P).

 

  • VLBS-U-LT: Proof of low temperature suitability down to −45° C

  • Pivoting 180°.

  • Suspension ring can be angled into position (VLBS-U).

  • Suspension ring & weld-on-block of the VLBS-U are undetachable.

VIP Load ring for welding / VIP Load ring for welding undetachable.

 
Lifting_Points_short_catalogue_V1_en-33X.jpg

VRBS

PRODUCT FEATURES

 

  • Comprehensive range of WLL 4 t – 31,5 t.

 

  • Clear marking of the minimum WLL for all loading directions.

 

  • Patented markings for easy determination for withdraw of service.

 

  • Distance knobs at the weld-on block to achieve the necessary distance for the root weld.

 

  • The weld-on-block is made (forged) out of a good weldable steel.

  • Split force introduction due to multiple point fixing.

  • Suspension ring pivots 180°.

  • 100 % WLL at 90° in the load ring plane possible.

VIP Load ring weldable.

 
Lifting_Points_short_catalogue_V1_en-34X.jpg

VRBS-FIX

PRODUCT FEATURES

 

  • Comprehensive range of WLL 4 t – 100 t.

 

  • Split force introduction due to multiple point fixing.

 

  • Suspension ring pivots 180°.

 

  • 100 % WLL at 90° in the load ring plane possible.

 

  • Thanks to the weld arrangement (circular fillet weld), no contact/crevice corrosion can occur.

 

  • Forged markings for easy determination of the load angle.

 

  • Patented markings for easy determination for withdraw of service.

 

  • Clamping spring works as a noise reduction and holds the suspension ring in the requested position

  • No complex leveling of the components to each other.

  • Clamping spring holds all parts together.

  • No crevice corrosion: endless HY weld seam.

VIP Load ring FIX weldable.

 
Lifting_Points_short_catalogue_V1_en-35X.jpg

VRBK-FIX

PRODUCT FEATURES

 

  • Comprehensive range of WLL 4 t – 50 t.

 

  • Split force introduction due to multiple point fixing.

 

  • Suspension ring with enlarged pivoting area up to 270°.

 

  • 100 % WLL at 90° in the load ring plane possible.

 

  • Thanks to the weld arrangement (circular fillet weld), no contact/crevice corrosion can occur.

 

  • Patented markings for easy determination for withdraw of service.

 

  • Clamping spring works as a noise reduction and holds the suspension ring in the requested position

  • Pivots up to 270°.

  • Preassembled components consisting of suspension ring and weld-on blocks.

  • No crevice corrosion: endless HY weld seam

VIP Load ring FIX weldable for edges.

 
Lifting_Points_short_catalogue_V1_en-36X.jpg

ABA

PRODUCT FEATURES

 

  • Comprehensive range of WLL 0.8 t – 31.5 t.

 

  • Forged, no rattling noise or shaking even at strong vibrations or shock loads, simple connection of lifting means possible.

 

  • Requirements of the DIN 18800 are fulfilled by the weld arrangement (circular fillet weld), this means non occurrence of contact/crevice corrosion due to the endless weld seam (therefore suitable for outdoor constructions).

 

  • Patented markings for easy determination for withdraw of service.

  • 4:1 safety against breaking.

  • Patented markings for easy determination for withdraw of service.

  • Tempered base body, therefore wear-resistant

Ready and indestructible – from all directions.

 
Lifting_Points_short_catalogue_V1_en-37X.jpg

VABH-W / VCGH-S

PRODUCT FEATURES

 

  • Comprehensive range of WLL 1.5 t – 20 t.

 

  • Can be combined with most commercial lifting means without additional connecting element.

 

  • Patented markings for easy determination for withdraw of service.

 

  • Robust, forged safety latch.

 

  • Phosphated surface.

 

  • Weld-on point can be used as excavator hook.

 

  • Simple and fast welding installation

  • Lifting point for spreaders and beams.

  • For wire rope slings and round slings.

  • For lifting means with loop or oval suspension ring.

VIP Excavator hook for welding.

 
Lifting_Points_short_catalogue_V1_en-38X.jpg

WPP(H)-S / -B / -VIP

PRODUCT FEATURES

 

  • Comprehensive range of WLL 0.63 t – 50 t.

 

  • WPP-S: weldable universal hook connection for ring assemblies, round slings, wire ropes, hook assemblies.

  • WPP-B: weldable ring connection for hook assemblies.

 

  • WPP-VIP: weldable, direct VIP-chain connection.

 

  • Rotatable at nominal WLL, 90° to the bolt-on direction.

 

  • Lowest kinking possibility due to cardan joint.

 

  • Parallel to the weld-on surface under nominal WLL.

  • Rotating 360°, pivoting 230°.

  • Double ball bearing for rotating and turning actions.

  • Universal, unmistakable VIP connection for chain, hook and eye

PowerPoint®-Star for welding / -Ring connection for hook assemblies for welding / -VIP-chain connection for welding

Also available as non-rotatable variant WPPH

 
Lifting_Points_short_catalogue_V1_en-39X.jpg

OFFER WITH A SYSTEM.

As a system provider, we are happy to support you holistically. For this reason, RUD also offers many other products that are indispensable for safely lifting, moving and transporting loads. Detailed information can be found in our specialist catalogues or at www.rud.com.

THESE RUD PRODUCTS MIGHT ALSO BE OF INTEREST TO YOU.

RUD lashing equipment in quality class 12-ICE stand for fast attachment and extra safety when transporting loads. They allow high maximum lashing forces with comparatively small chain dimensions - therefore high ergonomics due to the lower weight.

RUD LASHING EQUIPMENT.

RUD LIFTING MEANS.

RUD lifting means in quality classes 12-ICE and 10-VIP are the first choice for lifting and moving. They not only offer high load capacities with a smaller chain diameter, but also maximum user-friendliness through easier, energy-saving handling.

RUD TOOL MOVER TURNING TOOL.

With the TOOL MOVER turning tool, tools weighing a ton and susceptible or injection moulds can be turned safely, ergonomically and in a time-saving manner. With the large choice of attachment parts, you not only protect the tools, but also your employees.

RUD EXPERT DIALOGUE.

Do you have questions, special problems or complex lifting and transport tasks? Send us an e-mail to sling@rud.com or call us on: +49 7361 504-1070

 
Lifting_Points_short_catalogue_V1_en-40X.jpg

RUD Ketten

Rieger & Dietz GmbH u. Co. KG

 

Friedensinsel

73432 Aalen, Germany

 

Phone: +49 7361 504-1070

Fax: +49 7361 504-1460

 

Mail: sling@rud.com

Web: slingandlashing.rud.com

 

SPECIAL INDUSTRIAL SUPPLIES PTY LTD.

Tel National: 0861040506

Tel International: +27117925226

Cell: +27832514312

Unit 21, Acacia Industrial Park
17 Arbeid Avenue, Strydom Park. 
South Africa.

info@liftlash.co.za

www.liftlash.co.za